Jaw crusher has been used in industrial production since 2001 because of its advantages of simple structure, reliable operation, easy manufacturing and maintenance, low production management and equipment costs. Therefore, it is still widely used in mineral processing, building materials, silicate and chemical sectors. For coarse and medium crushing of hard and medium-hard ores or stones, small jaw crushers are also used for fine crushing. Jaw crusher consists of a static jaw and a movable jaw forming a crushing cavity. The ore fed into the crushing cavity is squeezed, split, bent and crushed due to the reciprocating swing of the movable jaw driven by the rotating eccentric shaft. When the movable jaw leaves the static jaw, the lower part of the crushing cavity has been crushed to a size smaller than the ore discharge opening, and only drops a certain distance with the discharge of ore. Until the movable jaw turns to approach the static jaw, the ore that has dropped in the crushing cavity will Only to be broken again. This continues until all the ores fed into the crushing cavity are discharged from the ore discharge port.
Related parameters of jaw crusher
Model
Maximum
Feed particle size
(mm)
Discharge port< br/> Adjustment range
(mm)
Eccentric shaft
Speed
(rev/
min)
Output< br/> (tons/
hours)
Power
(kilowatts)
Machine weight
(tons)
< br/>
< br/>
< br/>
< br/>
< br/>
< br/>
< br/>
< br/>
< br/>
< br/>
< br/>
Supply jaw crusher|PE150×250|Kunming Heavy Machinery